BE-85.265.013
Earn [points_amount] when you buy this item.
Threaded pressure washer spray tip. Hardened stainless-steel nozzle ensures consistent, accurate orifice size
5 Degree and 65 Degree Specialty Nozzles.
5° Typically used for softwash and sandblasting.
65° Very broad angle for rinsing and spraying and water brooms.
Product may differ in appearance from the picture.
PLEASE NOTENPT thread does not match the measurement on a tape. Please use the chart below or contact us if you are unsure what size you need.
Important- Use this nozzle selection guide and choose your orifice size based on the flow (gpm) and pressure (psi) of your washer.
A nozzle with an orifice that is too large will reduce operating pressure. A nozzle with an orifice that is too small will limit water flow and possibly create an excessive load on the machine.