BE Power Equipment 1/4" MEG 25° 5000psi

2025-12-17T11:12:33-08:00

Type : Threaded Spray Tips
Prix : 8.99 - 18.99 (16 variants)

Description Specs & Threading Applications

The Industry Standard for Surface Cleaners & Softwash J-Rods

The BE Power Equipment 25° MEG Nozzle is the universal standard for flat surface cleaners and general flushing. Unlike soft brass fittings that erode quickly, these are machined from Hardened 400-Series Stainless Steel.

The 25° angle creates a wide, consistent "sheet" of water. It is the exact OEM replacement part for Whirl-A-Way, General Pump Hammerhead, and Whisper Wash surface cleaners. It balances impact with coverage, allowing you to clean large areas of concrete without leaving "striping" marks.

✅ Why Hardened Stainless Steel?

Surface cleaners run at high RPM, and J-Rods live in bleach! Standard stainless tips eventually "wash out" under this stress. Hardened Stainless Steel is engineered to withstand the dual threat of high-pressure erosion and chemical corrosion from softwash mixes (SH). This ensures your fan pattern remains tight and consistent long after standard nozzles have failed.

⚠️ Precision Sizing Required

Selecting the wrong orifice size is the #1 cause of decreased performance.

Too Small: Your unloader valve will bypass water to limit pressure. This reduces the flow rate at the tip, killing your cleaning efficiency.

Too Big: System pressure drops drastically, significantly reducing your impact force and cleaning power.

Use the Smart Calculator below to find your exact match.

📐 Nozzle Size Calculator

Enter your machine's specs to generate the recommended orifice size.

Using a Dual-Arm Surface Cleaner?
(Check this box if installing on a Whirl-A-Way to split the flow)

Flow (GPM)
2.0 GPM

2.5 GPM

3.0 GPM

3.5 GPM

4.0 GPM

4.5 GPM

5.0 GPM

5.5 GPM

6.0 GPM

8.0 GPM

10.0 GPM

12.0 GPM

Pressure (PSI)
2000 PSI

2500 PSI

3000 PSI

3500 PSI

4000 PSI

5000 PSI

Exact Calculation:
# 2.00
Recommended Orifice Size: # 2.0
⚠️ IMPORTANT: This size is PER NOZZLE.
Buy TWO of these.

Gas HP
14.5 HP

Elec HP
11.0 HP

Hyd HP
9.3 HP

Note: When calculating for Surface Cleaners, we round DOWN to maintain rotation speed.

Technical Specifications

Thread Type | 1/4" NPT Male
Material | Hardened Stainless Steel (400 Series)
Max Pressure | 5,000 PSI
Installation | Use PTFE Tape / Thread Sealant

Spray Angle Color Guide

Note: MEG nozzles are unpainted stainless steel. The list below references the matching Quick Connect industry standard colors.

🔴 0° (Red): Cutting / Hydro-Excavation / J-Rod High Reach.

🟡 15° (Yellow): Chiseling / Paint Stripping.

🟢 25° (Green): Flushing / Surface Cleaners / J-Rod Close Application.

⚪ 40° (White): Washing / Windows / Siding.

Professional 25° Use Cases:

Surface Cleaners (Whirl-A-Way): The 25° spray pattern is the industry standard for 90% of surface cleaners. It provides the optimal overlap for streak-free concrete cleaning.

General Washing: Ideal for rinsing soap off siding, cleaning decks, or washing vehicles. The fan is wide enough to be safe on most hard surfaces but concentrated enough to move debris.

Fleet Washing: The standard tip for pressure washer wands when cleaning trucks and heavy equipment, balancing coverage with impact.

💧 Softwash & J-Rod Sizing Guide

This product line is compatible with the RINSE slots of standard Softwash J-Rods.

Your Machine

Standard Rinse Tip
(High Pressure)

Standard Soap Tip
(Low Pressure)

2 - 3 GPM | Size # 10.0 | Size # 30.0
3.5 - 4.5 GPM | Size # 10.0 | Size # 40.0
5 - 6.5 GPM | Size # 15.0 | Size # 40.0
7 - 8.5 GPM | Size # 20.0 | Size # 60.0

Note: Installing a #30 - #60 nozzle on a standard machine will drop pressure drastically, automatically engaging your downstream chemical injector.

🔧 Installation Note: NPT threads are tapered. They require force to seal. Always use thread tape to prevent "galling" (friction welding) and to ensure a leak-proof seal.