Suttner Milling Non-Rotating Sewer and Drain Nozzles 1/4 Inch Thread 5076psi

2022-08-31T04:46:16-07:00

Price: 222.60

Suttner Non-Rotating "Milling" Sewer and Drain Nozzle 1/4 Inch thread.

Ports have precisely drilled inserts.

1/4" Milling models include four rear jets and three or four front jets for cutting through the toughest blockages including "milling" through roots.

Applications:

Ideal for 2” - 4" diameter lines. Suitable for 1-1/2" or up to 6" pipe.

Features:

Hardened stainless steel - wear resistant.

Outside diameter: 0.95".

4 rear Jets - configurable with insert.

3 or 4 x Front Jets - configurable with insert.

Sharp cutting edges and forward tearing jets cut through solid plugs.

Works well for lines with roots.

Nozzle Orifice: Optional

Use the nozzle chart ad selection guide to match the flow rate (gpm) and pressure with your pump. Choose the closest match nozzle orifice based on your specs.

A nozzle with an orifice that is too large will reduce operating pressure. A nozzle with an orifice that is too small will limit water flow and possibly create an excessive load on the machine and reduce performance.

Pro Tip** - For sewer jetting it is best to size the nozzle to allow the most flow possible so it's okay to choose a size larger than you would for pressure washer.